---

Virginia DMV Motor Carrier Service Centers Field Devices

Status:

Existing

Definition:

This element represents ITS Field devices like weigh-in-motion installed by the Virginia DMV office.

Stakeholder:

Virginia DMV

Architecture Flow Diagrams
which include Virginia DMV Motor Carrier Service Centers Field Devices:

• Virginia DMV Motor Carrier Service Centers Field Devices Private Commercial Vehicles
• Virginia DMV Motor Carrier Service Centers Field Devices Virginia DMV Motor Carrier Service Centers

Architecture Flows
to/from the Virginia DMV Motor Carrier Service Centers Field Devices:

Virginia DMV Motor Carrier Service Centers Field Devices Private Commercial Vehicles

• on-board safety request


• pass/pull-in

Virginia DMV Motor Carrier Service Centers Field Devices Virginia DMV Motor Carrier Service Centers

• violation notification

Private Commercial VehiclesVirginia DMV Motor Carrier Service Centers Field Devices

• on-board safety data


• safety inspection record

Virginia DMV Motor Carrier Service CentersVirginia DMV Motor Carrier Service Centers Field Devices

• credentials information


• credentials status information


• cv driver record

National ITS Architecture Subsystems
mapped to the Virginia DMV Motor Carrier Service Centers Field Devices:

• Commercial Vehicle Check Subsystem

National ITS Architecture Services
associated with Virginia DMV Motor Carrier Service Centers Field Devices:

• CVO03 - Electronic Clearance -- (Graphic)
• CVO06 - Weigh-In-Motion -- (Graphic)

National ITS Architecture Functional Requirements
associated with Virginia DMV Motor Carrier Service Centers Field Devices:

Roadside Electronic Screening

1. The roadside check facility equipment shall detect the presence of commercial vehicles and freight equipment approaching a facility. Sensors can differentiate between different types of vehicles and determine the number of axles, gross vehicle weight, and the identification of the vehicle and its cargo.
2. The roadside check facility equipment shall receive the credential and credentials status information (e.g. snapshots) from the commercial vehicle administration center to maintain an up to date list of which vehicles have been cleared (enrolled) to potentially pass through without stopping.
3. The roadside check facility equipment shall receive violation records from appropriate law enforcement agencies pertaining to commercial vehicles.
4. The roadside check facility equipment shall provide an interface to inspectors in the field to allow them to monitor and if necessary override the pull-in decisions made by the system.
5. The roadside check facility equipment shall request and input electronic screening data from the commercial vehicle's electronic tag data.
6. The roadside check facility equipment shall collect safety data from the commercial vehicle and its freight equipment.
7. The roadside check facility equipment shall send a pass/pull-in notification to the commercial vehicle and its driver based on the information received from the vehicle, the administration center, enforcement agencies, and the inspector. The message may be sent to the on-board equipment in the commercial vehicle or transmitted to the driver using equipment such as dynamic message signs, red-green lights, flashing signs, etc.
8. The roadside check facility equipment shall monitor alerting and advisory systems for security alerts and advisories.
9. The roadside check facility equipment shall send a record of daily activities at the facility including summaries of screening events and inspections to the commercial vehicle administration center.

Roadside WIM

1. The roadside check facility equipment shall detect the presence of commercial vehicles and freight equipment approaching a facility. Sensors can differentiate between different types of vehicles and determine the number of axles, gross vehicle weight, weight per axle, and the identification of the vehicle and its cargo.
2. The roadside check facility equipment shall request and input electronic screening data from the commercial vehicle's electronic tag data.
3. The roadside check facility equipment shall send a pass/pull-in notification to the commercial vehicle and its driver based on the information received from the vehicle and the measurements taken. The message may be sent to the on-board equipment in the commercial vehicle or transmitted to the driver using equipment such as dynamic message signs, red-green lights, flashing signs, etc.

Citation and Accident Electronic Recording

1. The roadside check facility equipment shall record the results of roadside inspections carried using an inspector's hand held terminal interface.
2. The roadside check facility equipment shall provide an interface for an inspector to add comments to the inspection results.
3. The roadside check facility equipment shall forward results of the roadside inspections to the commercial vehicle administration center either as needed or on a periodic basis. These reports include accident reports, violation notifications, citations, and daily site activity logs.
4. The roadside check facility equipment shall receive driver records from the commercial vehicle administration center to support driver identification and collection of driver credentials and history information.
5. The roadside check facility equipment shall collect safety data from the commercial vehicle and its freight equipment to help characterize the circumstances surrounding an accident.
6. The roadside check facility equipment shall read the driver identification card provided by the commercial vehicle driver and support cross-check of the identification data with driver records.