US: SAE LTE-V2X BSM - LTE-V2X WSMP
Description:
This solution is used within Canada and the U.S.. It combines standards associated with US: SAE LTE-V2X BSM with those for V-X: LTE-V2X WSMP. The US: SAE LTE-V2X BSM standards include upper-layer standards required to implement V2V safety information flows over C-V2X. The V-X: LTE-V2X WSMP standards include lower-layer standards that support connectionless, near constant, ultra-low latency vehicle-to-any communications using the WAVE Short Messaging Protocol (WSMP) over 3GPP C-V2X in the 5.9GHz spectrum.
Comm Profile: V-X: LTE-V2X WSMP
Standards in Profile:
Level | Doc # | Standard | Description |
Access
|
Bundle: 3GPP LTE-V2X
|
3GPP LTE-V2X (PC5)
|
This proxy standard represents the subset of the 3GPP Release 14 specification (the last version of 4G) in combination with IEEE 1609.3 and SAE 3161 standards that define Cellular Vehicle-to-Everything (C-V2X), which uses device-to-device communication (PC5) at 5.9GHz without requiring the presence of a base station.
|
Mgmt
|
3GPP 36.331
|
3GPP: E-UTRA - Radio Resource Control
|
The present document specifies the Radio Resource Control protocol for the radio interface between UE and E-UTRAN as well as for the radio interface between RN and E-UTRAN.
The scope of the present document also includes:
- the radio related information transported in a transparent container between source eNB and target eNB upon inter eNB handover;
- the radio related information transported in a transparent container between a source or target eNB and another system upon inter RAT handover.
|
Mgmt
|
3GPP 24.301
|
3GPP: NAS protocol for EPS
|
The present document specifies the procedures used by the protocols for mobility management and session management between User Equipment (UE) and Mobility Management Entity (MME) in the Evolved Packet System (EPS). These protocols belong to the non-access stratum (NAS). The EPS Mobility Management (EMM) protocol defined in the present document provides procedures for the control of mobility when the User Equipment (UE) is using the Evolved UMTS Terrestrial Radio Access Network (E-UTRAN). The EMM protocol also provides control of security for the NAS protocols. The EPS Session Management (ESM) protocol defined in the present document provides procedures for the handling of EPS bearer contexts. Together with the bearer control provided by the access stratum, this protocol is used for the control of user plane bearers.
|
Mgmt
|
SAE J3161
|
SAE J3161 LTE-V2X Deployment Profiles
|
This SAE Standard describes a reference system architecture based on LTE-V2X technology defined in ETSI Release 14. It also describes cross-cutting features unique to LTE-V2X PC5 sidelink (mode 4) that can be used by current and future application standards. The audience for this document includes the developers of applications and application specifications, as well as those interested in LTE-V2X system architecture, testing, and certification.
|
Security
|
|
Bundle: IEEE 1609.2
|
A bundle of standards that groups a set of IEEE security standards together for easy reference.
|
TransNet
|
IEEE 1609.3
|
IEEE 1609.3 WAVE - Networking Services
|
This standard defines the network and transport layer options for the WAVE environment. The standard defines three options: a bandwidth efficient single-hop solution known as WSMP, UDP/IP, and TCP/IP. It has been harmonized with ISO FNTP and FSAP - a common message format specified in ISO 16460.
|
Data Profile: US: SAE LTE-V2X BSM
Standards in Profile:
Level | Doc # | Standard | Description |
Facilities
|
SAE J2735
|
SAE J2735 DSRC Message Set
|
This standard defines the data and messages for use in DSRC (i.e., V2V, V2I, and V2D) applications. The SAE J2945 series defines additional requirements on how to use these messages.
|
ITS Application Entity
|
SAE J2735
|
SAE J2735 DSRC Message Set
|
This standard defines the data and messages for use in DSRC (i.e., V2V, V2I, and V2D) applications. The SAE J2945 series defines additional requirements on how to use these messages.
|
ITS Application Entity
|
SAE J3161/1
|
SAE J3161/1 Requirements for LTE-V2X Safety Communications
|
This SAE Standard specifies system requirements for an on-board vehicle-to-vehicle (V2V) safety communications system for light vehicles and public safety vehicles1, including standards profiles, functional requirements, and performance requirements. The system is capable of transmitting and receiving the SAE J2735-defined basic safety message (BSM) over a PC5 Sidelink V2X (mode 4) communications link as defined in ETSI Release 142,3. The system uses Institute of Electrical and Electronics Engineers (IEEE) 1609 standards for network and transport layer communciations, as well as security.
|
Readiness Description:
Multiple significant and minor issues. For existing deployments, the chosen solution is likely deficient in security or management capabilities, and the issues should be reviewed and upgrades developed as needed. Some solutions in this category may also be becoming obsolete from an interoperability perspective and if this is the case, then upgrades should be planned as soon as possible. For new deployments, the solution may be viable for pilots when applied to the triples it supports; such pilot deployments should consider a path to addressing these issues as a part of their design activities. The solution does not provide sufficient interoperability, management, and security to enable proper, full-scale deployment without additional work.
Last Updated 1/21/2025