1.5.11: Collect Vehicle Emissions Messages
This process shall obtain emissions data from individual connected vehicles equipped with transmitters that can send data from onboard processors. This process shall analyze the received messages against reference data obtained from another process within the Manage Emissions facility of the Manage Traffic function. The process shall use this reference data to determine whether or not a vehicle is possibly violating the acceptable levels of emissions output. When the process determines that a possible violation has occurred, it shall send the detected emissions levels and the vehicle identity to the process responsible for law enforcement in the Manage Emergency Services function for action. This process shall provide a test results message to other processes within the roadway to generate outputs to the driver of equipped connected vehicles. with in-vehicle units that can store and process the results for display to the drivers. The process shall accept inputs to control the emissions sensors and return operational status (state of the sensor device, configuration, and fault data) to the controlling process.
This process is associated with the Roadside Equipment physical object.
This process is associated with the following application objects:
- RSE Environmental Monitoring
- RSE Intersection Management
- RSE Low Emissions Zone Application
- RSE Restricted Lanes Application
- RSE Traveler Information Communications
This process is associated with the following data flows:
- emissions_violation_for_enforcement - Out
- vehicle_characteristics_for_collection - In
- vehicle_emissions_collection_data - Out
- vehicle_emissions_data_for_monitoring - Out
- vehicle_emissions_roadside_collection_control - In
- vehicle_signage_emissions_testing_results - Out
- vehicle_status_details_for_emissions - In