Link Type: Center to Field

Roadside Equipment --> Service Monitor System:
system monitoring

Definitions

system monitoring (Information Flow): Represents the interactive monitoring of system operations by the Service Monitor. It includes device housekeeping/heartbeat monitoring and network monitoring information, the status of installed applications, and the configuration of managed devices.

Roadside Equipment (Source Physical Object): 'Roadside Equipment' (RSE) represents the Connected Vehicle roadside devices that are used to send messages to, and receive messages from, nearby vehicles using Dedicated Short Range Communications (DSRC) or other alternative wireless communications technologies. Communications with adjacent field equipment and back office centers that monitor and control the RSE are also supported. This device operates from a fixed position and may be permanently deployed or a portable device that is located temporarily in the vicinity of a traffic incident, road construction, or a special event. It includes a processor, data storage, and communications capabilities that support secure communications with passing vehicles, other field equipment, and centers.

Service Monitor System (Destination Physical Object): The 'Service Monitor System' represents one or more center-based systems that provide monitoring, management and control services necessary to other applications and/or devices operating within the Connected Vehicle Environment. These support services enable other applications to provide transportation services.

Included In

This Information Flow is in the following Applications:

This Information Flow is in the following Application Objects:

Communication Diagrams

The communication diagram(s) can be viewed in SVG or PNG format and the current format is SVG. Switch to PNG format.


This profile describes applicable standards for Center to Field communications with RSEs. Common internet standards (HTTPS and TCP) are used in this profile.




This profile identifies applicable standards for Center to Field communications with RSEs. This profile uses the Simple Network Management Protocol (SNMP), an Internet-standard protocol for managing devices on IP networks.





Characteristics

Architectural:

Characteristic Value
Time Context Recent
Spatial Context Adjacent
Acknowledgement True
Cardinality Unicast
Initiator Destination

Security

This information flow triple is in the following applications with the following security levels.

Information Flow Security
Application Confidentiality Integrity Availability
Basis Basis Basis
Security levels have not been defined yet.