Roadside Equipment --> Intermodal Terminal:
container transfer location request

Definitions

container transfer location request (Information Flow): Request for the location within an intermodal facility for the transfer of a container.

Roadside Equipment (Source Physical Object): 'Roadside Equipment' (RSE) represents the Connected Vehicle roadside devices that are used to send messages to, and receive messages from, nearby vehicles using Dedicated Short Range Communications (DSRC) or other alternative wireless communications technologies. Communications with adjacent field equipment and back office centers that monitor and control the RSE are also supported. This device operates from a fixed position and may be permanently deployed or a portable device that is located temporarily in the vicinity of a traffic incident, road construction, or a special event. It includes a processor, data storage, and communications capabilities that support secure communications with passing vehicles, other field equipment, and centers.

Intermodal Terminal (Destination Physical Object): The 'Intermodal Terminal' represents the terminal areas corresponding to modal change points. This includes interfaces between roadway freight transportation and air, rail, and/or water shipping modes. The basic unit of cargo handled by the Intermodal Terminal physical object is the container; less-than-container load handling is typically handled at a different facility (i.e., Freight Consolidation Station). The Intermodal Terminal can include electronic gate control for entrance and exit from the facility, automated guidance of vehicles within the facility, alerting appropriate parties of container arrivals and departures, and inventory and location of temporarily stored containers.

Included In

This Information Flow is in the following Applications:

• Freight Drayage Optimization

This Information Flow is in the following Application Objects:

• RSE Intermodal Terminal Management
• Terminal Management

Communication Diagrams

The communication diagram(s) can be viewed in SVG or PNG format and the current format is SVG. Switch to SVG format. PNG format.

This profile describes applicable standards for Center to Field communications with RSEs. Common internet standards (HTTPS and TCP) are used in this profile.




This profile identifies applicable standards for Center to Field communications with RSEs. This profile uses the Simple Network Management Protocol (SNMP), an Internet-standard protocol for managing devices on IP networks.

Characteristics

Architectural:

Security

This information flow triple is in the following applications with the following security levels.